FOAMX filtration media is fully reticulated polyurethane filter
foam. The face grids are expanded aluminum. Enclosing the foam and
grids is an aluminum frame.
Applications
The FOAMX has a wide
variety of uses because of the porosity’s available in the foam. The
foam can be from 10 to 100 pores per lineal inch (PPI). As the PPI
of the foam increases so does the air resistance. This type of
filter is typically used in engine breathers, oil mist eliminators,
muffin fan filters, and on electronic cabinets. The filter is not
only effective but is also aesthetically pleasing with the black
foam and the aluminum frame. These filters have been mounted on the
front of many electronic cabinets as an appealing visual accent in
addition to their functionality.
Typical Specifications
Frame:
.025 aluminum
channel
Closure:
Aluminum blind rivet
Filtration Media:
10 - 100 pores per
lineal inch (PPI)
Face Grids:
Slit and expanded aluminum
Tolerances:
Length ± 1/16, width ±
1/16, thickness ± 1/32
Thicknesses
3/32, 1/4, 5/16, 3/8, 7/16, 1/2, 3/4, 7/8, 1 7/8, 3 7/8
(other thicknesses may be available)
Finishes
Chemical film, Clear
or Gold Irridite, Clear or Black Anodize
(available upon request)
Standards
FOAMX filtration media
carries an Underwriters Laboratories 900 Class 2 listing
